| No. | Brand | D | S | b | J | s | E | h | U |
| A12-34E2AG | Rotek | 160 mm | - | 5.5 mm | - | - | - | - | - |
| A9-24P2 | Rotek | - | - | 22.3 mm | - | - | - | - | - |
| RKS.161.16.1534 | SKF | 420 mm | - | - | - | - | - | - | - |
| RKS.162.14.0644 | SKF | 160 mm | - | - | - | - | - | - | - |
| L6-29N9Z | Rotek | - | 0.794 mm | - | - | 32.941 mm | - | - | - |
| RKS.061.25.1644 | SKF | 340 mm | - | 13.9 mm | - | - | - | - | - |
| RKS.921150303001 | SKF | 901.87 mm | - | 16.7 mm | - | - | - | - | - |
| RKS.162.14.1094 | SKF | 6.04 Inch | 153.416 Millimeter | - | - | - | - | - | - | - |
| A6-9E1B | Rotek | - | - | - | 170 mm | - | - | - | - |
| VSI251055-N | INA | - | - | - | - | 10 mm | - | - | - |
| RKS. 212600101001 | SKF | - | - | - | - | - | - | - | - |
| RKS.160.14.0744 | SKF | - | - | - | - | - | - | 51.594 mm | - |
| RKS.161.14.0744 | SKF | - | - | - | - | - | - | - | - |
| A14-33N1 | Rotek | 270 mm | - | - | - | - | - | - | - |
| R8-39N3 | Rotek | 27 mm | - | - | - | - | - | - | - |
| RKS.211091 | SKF | - | - | - | - | - | - | - | - |
| M5-26P1Z | Rotek | - | - | - | 98 mm | - | - | - | - |
| RKS.302070202001 | SKF | 1660 mm | - | 22.3 mm | - | - | - | - | - |
| VSA200944-N | INA | - | - | - | - | - | - | - | - |
| A8-19E5A | Rotek | - | 4.763 mm | - | - | - | - | - | - |
| M4-12P4 | Rotek | - | - | - | - | - | - | - | - |
| VLI200944-N | INA | - | - | - | - | - | - | - | - |
| RKS. 211440101001 | SKF | - | - | - | - | - | - | - | - |
| M4-26P4 | Rotek | 225 mm | - | - | - | - | - | - | - |
| RKS.222600101001 SKF Slewing Ring Bearings | Recommended tightening torque for grub screw:7.4 N·m; Housing material:Composite; H:93.5 mm; Hexagonal key size for grub screw N:3 mm; Limiting speed:5300 r/min; J:126 mm; H2:19 mm; Basic static load rating C0:15.3 kN; N:21.5 mm; A5:22 mm; H1:47.6 mm; Recommended diameter for attachment bolts, inch G:0.5 in; J min.:119 mm; Fatigue load limit Pu:0.655 kN; J max.:133 mm; Recommended diameter for attachment bolts, mm G:12 mm; |
| L6-37N9Z Rotek Slewing Ring Bearings | Ca:95.809 mm; RG:3/4 NPT; H:360.363 mm; H1:179.4 mm; Cap bolt recommended tightening torque:1220 N·m; Da:309.999 mm; PG:1/4 NPT; Cap bolt, SAE grade:8; A2:247.65 mm; Pa:43.6 kN; P180°:133 kN; End plug (suffix Y):EPR 18; Eye bolt:2 x 3/8-16 UNC; Bearing limiting speed:2600 r/min; h:54.769 mm; P90°:207 kN; A1:171.45 mm; Initial grease fill:878.85 g; R2:37.306 mm; R1:115.888 mm; |
| RKS.061.20.0744 SKF Slewing Ring Bearings | B1:39 mm; Mass adapter sleeve assembly:0.31 kg; B:13 mm; d3:65 mm; d:45 mm; d1:36.513 mm; G:M 45x1.5; |
| M4-22P4 Rotek Slewing Ring Bearings | H2:41.275 mm; P120°:38.3 kN; J1:53.975 mm; H1:101.6 mm; Mass pillow block:23.6 kg; J max.:295.275 mm; RG:3/8 NPT; P180°:42.3 kN; Cap bolt:2 x 5/8-11 UNC; A1:98.425 mm; Da:160 mm; P150°:34.7 kN; R2:27.94 mm; Labyrinth ring:2 x LOR 37; Cap bolt recommended tightening torque:298.3 N·m; PG:1/8 NPT; L:349.25 mm; P90°:60.9 kN; Housing:FSAF 615; H:192.088 mm; |
| A6-9P4 Rotek Slewing Ring Bearings | A2:198.438 mm; R1:53.975 mm; A1:88.9 mm; Initial grease fill:218.29 g; PG:1/8 NPT; L:330.2 mm; P150°:28.5 kN; Stabilizing ring:2 x SR-1517; h:36.513 mm; P120°:31.6 kN; R2:22.225 mm; Mass pillow block:17.9 kg; Appropriate attachment bolt size G:0.75 in; Housing:SAF 517; J min.:250.825 mm; J max.:279.4 mm; da:76.2 mm; Da:150 mm; Max. speed for Taconite seal:1050 r/min; P180°:34.7 kN; |
| RKS.060.20.0414 SKF Slewing Ring Bearings | Pa:1000 kN; L:640 mm; N1:35 mm; Cap bolt, size:M 24x160; A1:240 mm; Oil level, max.:69 mm; H2:90 mm; ba max.:128 mm; End cover:ETS 3148 R; Q120°:1800 kN; H:434 mm; N4 max.:20 mm; P120°:1400 kN; N:42 mm; Cap bolt, rec. tightening torque:350 N·m; J1:140 mm; P0°:3100 kN; s:12 mm; ba min.:97 mm; Q150°:1040 kN; |
| L6-33N9ZD Rotek Slewing Ring Bearings | Specific dynamic load factor K:25 N/mm²; Coefficient of friction µ min.:0.08; a:3 mm; Tolerance shaft:e7; Coefficient of friction µ max.:0.15; Tolerance housing:H7; α:105 °; d:15 mm; D1:28 mm; B:12 mm; Specific static load factor K0:45 N/mm²; D:22 mm; Permissible sliding velocity v min.:0 m/s; Mass bushing:0.028 kg; B1:3 mm; h:16 mm; Permissible sliding velocity v max.:0.5 m/s; |
| A6-14E1 Rotek Slewing Ring Bearings | Static (Coa):39.1 kN; rs (min):1.5 mm; D:62 mm; r1s (min):1.5 mm; Dynamic (Ca):36.2 kN; a:20 mm; Pu:4.770 kN; r2s (min):0.6 mm; C:13 mm; d2:25 mm; T:18.25 mm; B:17 mm; |
RKS.921150303001 SKF Slewing Ring Bearings Video
SKF RKS.921150303001 crossed roller slewing bearing
Jun 19, 2018 - SKF RKS.921150303001 crossed roller slewing bearing, external gear teeth, size 233*403.5*55mm
Slewing bearings
RKS.162.14.1094 is the best choice; otherwise the four-point contact ball slewing bearing RKS.062.20.1094 is suitable for this task. ...... RKS.921150303001
RKS.921150303001 - SKF
Inner Diameter, 233. Outer Diameter (mm), 404. Width (mm), 55. Material/Treatment, C45 E. 11/28/2019 12:13:24 PM UTC. © Copyright 2019, SKF All Rights
SKF RKS.921150303001 cylindrical roller slewing bearings
SKF RKS.921150303001 are customized single row crossed cylindrical roller slewing bearings with an external gear.Slewing bearings with other gear
RKS.921150303001 crossed roller slew bearing
RIGIA specialized in SKF structure RKS.921150303001 cross roller slew bearing, RIGIA crossed cylindrical roller slewing bearings with an external gear teeth
RKS.921150303001
SKF-Bearing RKS.921150303001. View additional description. Call or Chat for lead time confirm availability; Typically ships in: 1 day; Weight: 51.5 lb. $1,810.01
Product Attributes - SKF
SKF Catalog · Bearings · Slewing bearing. Jump To. Product Attributes. Print this page. RKS.921150303001(. 50.2653 lb. ) Crossed roller slewing bearing with