| A12-32P2 Rotek Slewing Ring Bearings | d3 max.:204.927 mm; d1:136.525 mm; B4:30.15 mm; G:159.614 mm; Hydraulic nut:HMVC 32E; Threads per inch:8; B:26.441 mm; Mass adapter sleeve assembly:7.05 kg; B1:116.027 mm; Sleeve:S 32x5.3/8; d:160 mm; |
| RKS.162.14.0644 SKF Slewing Ring Bearings | Specific dynamic load factor K:150 N/mm²; dk:140 mm; D:160 mm; ra max.:1 mm; C:55 mm; b1:11.5 mm; da max.:111.2 mm; d:100 mm; Da max.:153.3 mm; B:85 mm; Lubricant:Maintenance free &nd; Mass plain bearing:6.8 kg; rb max.:1 mm; Material constant KM:330; Sealing solution:Triple-lip seals; Basic dynamic load rating C:980 kN; r2 min.:1 mm; M:5 mm; r1 min.:1 mm; da min.:108.1 mm; |
| RKS.060.20.0544 SKF Slewing Ring Bearings | Mass locking plate:0.55 kg; A1:56.363 mm; Hexagonal head bolts:2 x 5/8-11x1-1/4; L:259.563 mm; A2:38.887 mm; B:4.763 mm; A3:47.625 mm; |
| RKS.062.25.1644 SKF Slewing Ring Bearings | r1,2 min.:1.1 mm; Calculation factor (back-to-back, face-to-face) Y0:0.76; C1:9.3 mm; Number of balls z:24; Static axial stiffness, preload class A:164 N/µm; r3,4 min.:0.6 mm; Db max.:121.8 mm; Calculation factor f2A:1; Calculation factor fHC:1; Static axial stiffness, preload class C:324 N/µm; Calculation factor (back-to-back, face-to-face) X2:0.67; b:2.6 mm; Preload class A GA:260 N; |
| A8-22P11 Rotek Slewing Ring Bearings | H:19 mm; dynamic Cr:48.400 kN; Pu:4.200 kN; D:68 mm; rs (min):1 mm; d1:68 mm; Oil:4 200 min-1; d:40 mm; D1:42 mm; Grease:3 200 min-1; static Cor:92.400 kN; |
| XSA140944-N INA Slewing Ring Bearings | Stabilizing ring:SR-18-15; Pa:27.1 kN; P90°:60.9 kN; J min.:263.525 mm; Taconite seal (db shaft position):TER 79; Cap bolt recommended tightening torque:298.3 N·m; P150°:34.7 kN; dc:71.425 mm; db:87.325 mm; PG:1/8 NPT; Initial grease fill:141.75 g; End plug (suffix Y):EPR 8; da:75 mm; Max. speed for Taconite seal:900 r/min; Cap bolt, SAE grade:8; L:349.25 mm; A2:230.188 mm; H:192.088 mm; |
| RKS.062.25.1204 SKF Slewing Ring Bearings | Coefficient of friction µ min.:0.05; B:60 mm; Specific dynamic load factor K:10 N/mm²; D:68 mm; Coefficient of friction µ max.:0.1; Permissible sliding velocity v max.:5 m/s; Permissible sliding velocity v min.:0.25 m/s; Tolerance housing:H7; d:60 mm; Tolerance shaft:h8; Specific static load factor K0:20 N/mm²; Mass bushing:0.3 kg; |
| RKS.23 1091 SKF Slewing Ring Bearings | Fatigue load limit Pu:137 kN; Da max.:268 mm; Basic static load rating C0:1500 kN; Basic dynamic load rating C:1086 kN; Calculation factor e:0.3; Mass bearing + sleeve:25 kg; B2 ≈:109 mm; r1,2 min.:2.1 mm; B1:104 mm; b:13.9 mm; Calculation factor Y2:3.4; G1:16 mm; ra max.:2 mm; K:7.5 mm; Reference speed:1800 r/min; d2 ≈:195 mm; D:280 mm; d1:160 mm; Calculation factor Y1:2.3; da min.:178 mm; |