| RKS.060.20.0644 SKF Slewing Ring Bearings | Basic dynamic load rating C:657 kN; Limiting speed:2000 r/min; rb max.:4 mm; d:170 mm; Calculation factor e:0.43; db min.:189.5 mm; D:310 mm; Da min.:269 mm; Ca min.:8 mm; Db min.:288 mm; Da max.:293.5 mm; r3,4 min.:4 mm; Reference speed:1500 r/min; Mass bearing:16.6 kg; Calculation factor Y0:0.8; a:58.46 mm; B:52 mm; ra max.:5 mm; Fatigue load limit Pu:83 kN; r1,2 min.:5 mm; |
| L6-37N9ZD Rotek Slewing Ring Bearings | Oil level, max.:111 mm; End cover:ETS 3172 R; P120°:3100 kN; P150°:2700 kN; N:60 mm; bb:182 mm; N4 max.:35 mm; P180°:3500 kN; s:30 mm; Da:650 mm; P90°:4200 kN; N1:48 mm; ba min.:187 mm; H2:125 mm; Ca:220 mm; Oil level, min.:88 mm; Cap bolt, size:M 36x240; Mass housing:595 kg; L:1120 mm; A:425 mm; |
| RKS.160.16.1424 SKF Slewing Ring Bearings | Housing:FSAFS 216; h:31.75 mm; Cap bolt:2 x 5/8-11 UNC; db:92.075 mm; Ca:42.799 mm; da:80 mm; Stabilizing ring:SR-16-13; S:4.763 mm; H2:31.75 mm; RG:3/8 NPT; Taconite seal (db shaft position):TER 82; End plug (suffix Y):EPR 9; Cap bolt, SAE grade:8; A1:88.9 mm; P120°:49.8 kN; R2:21.431 mm; Initial grease fill:87.885 g; Pa:33.8 kN; Cap bolt recommended tightening torque:298.3 N·m; J max.:279.4 mm; |
| A12-32P2 Rotek Slewing Ring Bearings | d3 max.:204.927 mm; d1:136.525 mm; B4:30.15 mm; G:159.614 mm; Hydraulic nut:HMVC 32E; Threads per inch:8; B:26.441 mm; Mass adapter sleeve assembly:7.05 kg; B1:116.027 mm; Sleeve:S 32x5.3/8; d:160 mm; |
| RKS.161.20.1904 SKF Slewing Ring Bearings | r1 max.:0.8 mm; Lw:23.8 mm; r2 max.:1 mm; r1,2 min.:0.3 mm; Mass needle roller:3.67 g; Dw:5 mm; |
| RKS.061.25.1424 SKF Slewing Ring Bearings | Calculation factor Y0:0.38; Calculation factor X:0.41; Calculation factor Y2:1.41; d:30 mm; a:18 mm; d2 ≈:35.96 mm; Basic dynamic load rating C:27.5 kN; ra max.:1 mm; Basic static load rating C0:17.3 kN; Da max.:56.4 mm; D:62 mm; Mass bearing:0.2 kg; Db max.:57.8 mm; Calculation factor kr:0.095; r1,2 min.:1 mm; Calculation factor e:0.68; D1 ≈:50.1 mm; Calculation factor A:0.00155; d1 ≈:42.48 mm; |
| L6-33P9ZD Rotek Slewing Ring Bearings | Coefficient of friction µ max.:0.1; Permissible sliding velocity v max.:5 m/s; Tolerance housing:H7; Permissible sliding velocity v min.:0.25 m/s; Coefficient of friction µ min.:0.05; D:120 mm; d:100 mm; Tolerance shaft:h8; B:80 mm; Specific static load factor K0:20 N/mm²; Mass bushing:1.71 kg; Specific dynamic load factor K:10 N/mm²; |
| M4-26P4Z Rotek Slewing Ring Bearings | da:174.625 mm; J1:114.3 mm; Taconite seal:TER 154; S:4.763 mm; A2:339.725 mm; PG:1/4 NPT; L:711.2 mm; A1:190.5 mm; Cap bolt recommended tightening torque:1735.4 N·m; P90°:249 kN; J max.:619.125 mm; Housing:SAFS 538; RG:1 NPT; P60°:416 kN; H:398.462 mm; R2:42.069 mm; H1:200.025 mm; Cap bolt, SAE grade:8; J min.:549.275 mm; h:61.913 mm; |