| M5-30P1 Rotek Slewing Ring Bearings | Recommended diameter for attachment bolts, mm G:12 mm; Recommended diameter for attachment bolts, inch G:0.5 in; Housing material:Composite; Mass bearing unit:0.68 kg; Limiting speed:1100 r/min; Recommended tightening torque for grub screw:4 N·m; A5:22 mm; B:42.9 mm; Hexagonal key size for grub screw N:3 mm; A3:3.2 mm; Basic static load rating C0:15.3 kN; Da:106.4 mm; N:14.8 mm; J:92 mm; A:35 mm; |
| A13-22P4 Rotek Slewing Ring Bearings | A1:222.25 mm; Cap bolt recommended tightening torque:400 N·m; Housing:SAF 338; Max. speed for Taconite seal:265 r/min; S:4.763 mm; ba:99.219 mm; R1:130.175 mm; Appropriate attachment bolt size G:1.5 in; Eye bolt:2 x 1/2-13 UNC; R2:46.831 mm; h:85.725 mm; Pa:113 kN; db:212.725 mm; J max.:708.025 mm; da:190 mm; P180°:173 kN; Initial grease fill:2749.95 g; P120°:160 kN; End plug (suffix Y):EPR 21; |
| M4-22P4 Rotek Slewing Ring Bearings | H2:41.275 mm; P120°:38.3 kN; J1:53.975 mm; H1:101.6 mm; Mass pillow block:23.6 kg; J max.:295.275 mm; RG:3/8 NPT; P180°:42.3 kN; Cap bolt:2 x 5/8-11 UNC; A1:98.425 mm; Da:160 mm; P150°:34.7 kN; R2:27.94 mm; Labyrinth ring:2 x LOR 37; Cap bolt recommended tightening torque:298.3 N·m; PG:1/8 NPT; L:349.25 mm; P90°:60.9 kN; Housing:FSAF 615; H:192.088 mm; |
| VSU250955 INA Slewing Ring Bearings | Housing:SAF 314; Mass pillow block:20.2 kg; N1:22.225 mm; Cap bolt, SAE grade:8; P90°:55.6 kN; Initial grease fill:110.56 g; H:187.325 mm; P120°:34.7 kN; A2:210.344 mm; Da:150 mm; dc:66.675 mm; Ca:60.808 mm; ba:42.069 mm; P60°:92.5 kN; Appropriate attachment bolt size G:0.75 in; H1:95.25 mm; Max. speed for Taconite seal:925 r/min; Stabilizing ring:SR-17-14; A1:88.9 mm; PG:1/8 NPT; |
| RKS.160.14.0544 SKF Slewing Ring Bearings | Attainable speed for grease lubrication:34000 r/min; Static axial stiffness, preload class A:31 N/µm; da min.:39.6 mm; Static axial stiffness, preload class B:49 N/µm; Fatigue load limit Pu:0.28 kN; Preload class A GA:60 N; Calculation factor f2A:1; Calculation factor f0:7.9; Static axial stiffness, preload class C:67 N/µm; d1:43.7 mm; Calculation factor f:1.06; a:13.5 mm; Ball diameter Dw:7.144 mm; |
| RKS.23 0541 SKF Slewing Ring Bearings | db min.:107 mm; Basic dynamic load rating C:42.3 kN; da min.:107 mm; Static axial stiffness, preload class B:330 N/µm; Basic static load rating C0:38 kN; Static axial stiffness, preload class A:220 N/µm; d1:117.38 mm; r1,2 min.:1.5 mm; D1:132.61 mm; Calculation factor (single, tandem) Y2:0.87; Calculation factor f2A:1; Mass bearing:1.26 kg; Fatigue load limit Pu:1.43 kN; B:24 mm; Reference grease quantity Gref:17 cm³; |
| W13-35P1 Rotek Slewing Ring Bearings | D1:34.21 mm; Preload class C GC:235 N; Number of balls z:12; Attainable speed for grease lubrication:65000 r/min; dn:28.1 mm; Reference grease quantity Gref:1.1 cm³; Calculation factor f0:7.2; Basic static load rating C0:3.35 kN; a:10.2 mm; r1,2 min.:0.6 mm; d:20 mm; Calculation factor f2A:1; Calculation factor f:1.04; Ball diameter Dw:6.35 mm; K:0.5 mm; r3,4 min.:0.3 mm; Preload class B GB:120 N; |
| A12-27E3 Rotek Slewing Ring Bearings | S:0.794 mm; Basic dynamic load rating C:73.8 kN; J min.:142.875 mm; d2:62.706 mm; Mass bearing unit:3.63 kg; B:69.85 mm; H1:47.625 mm; H:100.013 mm; L:174.625 mm; H2:28.575 mm; s:25.4 mm; A:53.975 mm; J max.:149.225 mm; da:36.513 mm; Limiting speed:1700 r/min; Attachment bolt diameter G:12.7 mm; A1:72.231 mm; |