| M5-26P1 Rotek Slewing Ring Bearings | Thread grub screw G2:M8x1; Housing material:Composite; Recommended tightening torque for grub screw:6.5 N·m; H:82.5 mm; Recommended diameter for attachment bolts, inch G:0.5 in; A5:20 mm; H2:19 mm; d:30 mm; N1:14.5 mm; J:121 mm; A:40 mm; A1:25 mm; N:21.5 mm; H1:42.9 mm; Basic static load rating C0:11.2 kN; s1:30.1 mm; Limiting speed:1200 r/min; B1:48.4 mm; Mass bearing unit:0.54 kg; Hexagonal key size for grub screw N:4 mm; |
| RKS.161.16.1644 SKF Slewing Ring Bearings | Specific dynamic load factor K:10 N/mm²; B:4 mm; Permissible sliding velocity v min.:0.25 m/s; Tolerance shaft:h8; D:9 mm; Coefficient of friction µ min.:0.05; Specific static load factor K0:20 N/mm²; Coefficient of friction µ max.:0.1; Permissible sliding velocity v max.:5 m/s; d:6 mm; Mass bushing:0.001 kg; Tolerance housing:H7; |
| L9-38N9Z Rotek Slewing Ring Bearings | d1 ≈:170.6 mm; B2:29.5 mm; r3,4 min.:4 mm; B1:17 mm; d:110 mm; Mass angle ring:2.1 kg; |
| VSI250955-N INA Slewing Ring Bearings | D:90 mm; Reference speed:7000 r/min; G:M 45x1.5; Limiting speed:9500 r/min; B2 ≈:32 mm; Calculation factor e:0.24; da min.:47.2 mm; B1:29 mm; Basic static load rating C0:108 kN; Da max.:81 mm; Calculation factor Y2:4.2; G1:6 mm; Basic dynamic load rating C:107 kN; B:23 mm; Calculation factor Y1:2.8; r1,2 min.:1.5 mm; K:3 mm; Calculation factor Y0:2.8; D1 ≈:79.8 mm; Mass bearing + sleeve:0.84 kg; |
| RKS.122290101002 SKF Slewing Ring Bearings | Ca:72.619 mm; J max.:368.3 mm; Cap bolt, SAE grade:8; L:419.1 mm; RG:1/2 NPT; Eye bolt:2 x 3/8-16 UNC; Cap bolt recommended tightening torque:298.3 N·m; P180°:107 kN; H:257.175 mm; PG:1/4 NPT; P150°:87.2 kN; P90°:149 kN; Taconite seal:TER 122; J min.:336.55 mm; Initial grease fill:379.89 g; Cap bolt:5/8-11 UNC; Stabilizing ring:2 x 36053-50; A1:120.65 mm; Appropriate attachment bolt size G:0.75 in; |
| VSI201094-N INA Slewing Ring Bearings | d:80 mm; rs (min):1 mm; D:105 mm; Pu:6.410 kN; D1:82 mm; Oil:3 500 min-1; d1:105 mm; dynamic Cr:49.950 kN; H:19 mm; static Cor:141.000 kN; Grease:2 700 min-1; |
| A10-35N1L Rotek Slewing Ring Bearings | d:6.35 mm; ra max.:0.1 mm; da max.:7 mm; Limiting speed:60000 r/min; D:9.525 mm; D2 ≈:8.85 mm; Fatigue load limit Pu:0.004 kN; Basic dynamic load rating C:0.212 kN; B:3.175 mm; d1 ≈:7.08 mm; da min.:7 mm; Reference speed:120000 r/min; Calculation factor f0:8; Basic static load rating C0:0.088 kN; Mass bearing:0.00071 kg; D3:10.719 mm; r1,2 min.:0.1 mm; Calculation factor kr:0.015; C:0.914 mm; |
| RKS.160.16.1754 SKF Slewing Ring Bearings | Fatigue load limit Pu:1290 kN; T:384.175 mm; Calculation factor e:0.33; d:384.175 mm; d1 ≈:455 mm; r3,4 min.:1.5 mm; Basic dynamic load rating C:6440 kN; Calculation factor Y1:2; Calculation factor Y0:2; D1 ≈:520 mm; D:546.1 mm; B:437.96 mm; Comparative radial load rating CF:1730 kN; Calculation factor Y2:3; Design variant/feature:TQI; Comparative axial load rating CFa:278 kN; r1,2 min.:6.4 mm; |