| RKS.062.20.1094 SKF Slewing Ring Bearings | d1:67 mm; d3:75 mm; Mass lock nut:0.21 kg; h:3 mm; B:14 mm; Associated spanner:HN 10-11; Grub (set) screw size:M6; B3:3 mm; G:M 55x2; Axial static load carrying capacity:91.5 kN; b:7 mm; Recommended grub screw tightening torque:8 N·m; |
| M4-12P4 Rotek Slewing Ring Bearings | Mass inner ring:0.015 kg; F:24 mm; d:20 mm; B:16 mm; r, r1,2 min.:0.3 mm; |
| L9-38N9Z Rotek Slewing Ring Bearings | d1 ≈:170.6 mm; B2:29.5 mm; r3,4 min.:4 mm; B1:17 mm; d:110 mm; Mass angle ring:2.1 kg; |
| RKS.160.14.0414 SKF Slewing Ring Bearings | da:107.95 mm; P180°:55.6 kN; Initial grease fill:181.44 g; H2:44.45 mm; H1:114.3 mm; Mass pillow block:28.6 kg; Cap bolt recommended tightening torque:203.4 N·m; h:39.688 mm; A2:228.6 mm; H:217.488 mm; L:387.35 mm; Max. speed for Taconite seal:725 r/min; P120°:50.7 kN; PG:1/4 NPT; ba:46.831 mm; Taconite seal:TER 114; Stabilizing ring:2 x 38151-24; R1:58.737 mm; RG:3/8 NPT; R2:30.163 mm; |
| RKS.062.25.1644 SKF Slewing Ring Bearings | r1,2 min.:1.1 mm; Calculation factor (back-to-back, face-to-face) Y0:0.76; C1:9.3 mm; Number of balls z:24; Static axial stiffness, preload class A:164 N/µm; r3,4 min.:0.6 mm; Db max.:121.8 mm; Calculation factor f2A:1; Calculation factor fHC:1; Static axial stiffness, preload class C:324 N/µm; Calculation factor (back-to-back, face-to-face) X2:0.67; b:2.6 mm; Preload class A GA:260 N; |
| M5-30P1 Rotek Slewing Ring Bearings | Recommended diameter for attachment bolts, mm G:12 mm; Recommended diameter for attachment bolts, inch G:0.5 in; Housing material:Composite; Mass bearing unit:0.68 kg; Limiting speed:1100 r/min; Recommended tightening torque for grub screw:4 N·m; A5:22 mm; B:42.9 mm; Hexagonal key size for grub screw N:3 mm; A3:3.2 mm; Basic static load rating C0:15.3 kN; Da:106.4 mm; N:14.8 mm; J:92 mm; A:35 mm; |
| RKS.220641 SKF Slewing Ring Bearings | T:61.5 mm; r2s (min):1 mm; d2:120 mm; Static (Coa):685 kN; C:50 mm; Dynamic (Ca):462 kN; D:215 mm; rs (min):3 mm; Pu:81.740 kN; a:52 mm; B:58 mm; r1s (min):2.5 mm; |
| L9-38E9Z Rotek Slewing Ring Bearings | Fatigue load limit Pu:1.53 kN; a:26 mm; da min.:49 mm; d:40 mm; D:90 mm; d1 ≈:59.7 mm; r3,4 min.:1 mm; Basic dynamic load rating C:56 kN; D1 ≈:71.32 mm; Calculation factor Y0:0.76; Db max.:84.4 mm; rb max.:1 mm; Calculation factor kr:0.1; Calculation factor A:0.00707; Calculation factor e:0.68; Basic static load rating C0:36 kN; ra max.:1.5 mm; B:23 mm; Calculation factor Y1:0.92; |