| RKS. 512080101001 SKF Slewing Ring Bearings | r, r1,2 min.:0.3 mm; F:26 mm; d:22 mm; B:20 mm; Mass inner ring:0.023 kg; |
| VSI201094-N INA Slewing Ring Bearings | d:80 mm; rs (min):1 mm; D:105 mm; Pu:6.410 kN; D1:82 mm; Oil:3 500 min-1; d1:105 mm; dynamic Cr:49.950 kN; H:19 mm; static Cor:141.000 kN; Grease:2 700 min-1; |
| L6-37N9ZD Rotek Slewing Ring Bearings | Oil level, max.:111 mm; End cover:ETS 3172 R; P120°:3100 kN; P150°:2700 kN; N:60 mm; bb:182 mm; N4 max.:35 mm; P180°:3500 kN; s:30 mm; Da:650 mm; P90°:4200 kN; N1:48 mm; ba min.:187 mm; H2:125 mm; Ca:220 mm; Oil level, min.:88 mm; Cap bolt, size:M 36x240; Mass housing:595 kg; L:1120 mm; A:425 mm; |
| RKS.161.14.1094 SKF Slewing Ring Bearings | Calculation factor f0:7; Mass bearing:0.002 kg; Fatigue load limit Pu:0.01 kN; Limiting speed:53000 r/min; D:12.7 mm; d:6.35 mm; d2 ≈:7.4 mm; Reference speed:110000 r/min; r1,2 min.:0.15 mm; Basic dynamic load rating C:0.618 kN; da min.:0 mm; Basic static load rating C0:0.224 kN; ra max.:0.15 mm; Calculation factor kr:0.02; B:4.762 mm; Da max.:0 mm; D2 ≈:11.6 mm; |
| L6-16N9Z Rotek Slewing Ring Bearings | RG:3/8 NPT; ba:40.481 mm; Stabilizing ring:SR-18-15; H1:101.6 mm; A2:149.225 mm; Mass pillow block:31.3 kg; End plug (suffix Y):EPR 11; P150°:48 kN; L:349.25 mm; Housing:SSAFS 518; Ca:49.809 mm; Cap bolt, SAE grade:8; Initial grease fill:141.75 g; P120°:53.4 kN; Pa:10.9 kN; da:79.375 mm; R2:27.781 mm; PosiTrac Plus contact element:2 x B10724-188; H:196.85 mm; Cap bolt recommended tightening torque:149.1 N·m; |
| A8-22N2A Rotek Slewing Ring Bearings | Basic dynamic load rating C:39 kN; d3:75 mm; B:25 mm; Da max.:91 mm; Basic static load rating C0:13.4 kN; Ba min.:11 mm; Reference speed:12000 r/min; Calculation factor Y2:4.2; Calculation factor Y1:2.7; Calculation factor e:0.23; Limiting speed:8500 r/min; da max.:67 mm; r1,2 min.:1.5 mm; Permissible angular misalignment α:2.5 °; db min.:60 mm; Calculation factor kr:0.045; B1:45 mm; d:50 mm; |
| A6-11P5 Rotek Slewing Ring Bearings | Specific dynamic load factor K:10 N/mm²; B:70 mm; Coefficient of friction µ max.:0.1; d:60 mm; D:68 mm; Permissible sliding velocity v min.:0.25 m/s; Tolerance shaft:h8; Tolerance housing:H7; Coefficient of friction µ min.:0.05; Specific static load factor K0:20 N/mm²; Permissible sliding velocity v max.:5 m/s; Mass bushing:0.35 kg; |
| L6-22P9Z Rotek Slewing Ring Bearings | Mass bearing:43 kg; D1:484 mm; Basic dynamic load rating C:1460 kN; Minimum axial load factor A:5.78; H:80 mm; d1:576 mm; Reference speed:280 r/min; da min.:573 mm; Limiting speed:560 r/min; d:480 mm; B:24 mm; ra max.:2 mm; r1,2 min.:2.1 mm; Basic static load rating C0:8500 kN; Fatigue load limit Pu:560 kN; Da max.:500 mm; D:580 mm; |