| L9-38P9Z Rotek Slewing Ring Bearings | Mass bearing (including seat washer where applicable):155 kg; d:750 mm; H:120 mm; Fatigue load limit Pu:110 kN; Limiting speed:480 r/min; Da max.:811 mm; Basic static load rating C0:8650 kN; Reference speed:340 r/min; Basic dynamic load rating C:1010 kN; D1 ≈:755 mm; r1,2 min.:4 mm; Minimum load factor A:390; D:900 mm; da min.:839 mm; d1 ≈:895 mm; ra max.:3 mm; |
| L6-22P9ZD Rotek Slewing Ring Bearings | d2 ≈:179 mm; Operating clearance factor k2:0.122; r1,2 min.:4 mm; Misalignment factor k1:0.093; Da max.:263 mm; Limiting speed:3200 r/min; Mass bearing:27 kg; D:280 mm; Basic dynamic load rating C:980 kN; s1 max.:31.2 mm; Ca min.:-7.5 mm; Reference speed:2400 r/min; Fatigue load limit Pu:114 kN; Basic static load rating C0:1220 kN; D1 ≈:234 mm; ra max.:3 mm; B:93 mm; d:130 mm; Da min.:216 mm; |
| A9-24P2 Rotek Slewing Ring Bearings | ra max.:6 mm; Limiting speed:380 r/min; Calculation factor Y2:5; da min.:966 mm; B2 ≈:375 mm; B1:355 mm; b:22.3 mm; Calculation factor Y0:3.2; Fatigue load limit Pu:1600 kN; Da max.:1332 mm; K:12 mm; d1:900 mm; d2 ≈:1086 mm; Calculation factor e:0.2; Reference speed:200 r/min; G1:55 mm; B:300 mm; G:Tr 1000x8; D1 ≈:1246 mm; Basic static load rating C0:28500 kN; |
| RKS.23 0641 SKF Slewing Ring Bearings | Cap bolt recommended tightening torque:149.1 N·m; Labyrinth ring (dc shaft position):LOR 46; P60°:75.6 kN; PG:1/8 NPT; P180°:30.2 kN; Ca:37.008 mm; Cap bolt:2 x 1/2-13 UNC; Stabilizing ring:SR-15-0; Cap bolt, SAE grade:8; S:3.175 mm; R1:46.038 mm; h:28.575 mm; dc:71.438 mm; da:75 mm; Initial grease fill:68.04 g; P150°:25.4 kN; P120°:28.5 kN; ba:32.544 mm; Da:130 mm; db:87.313 mm; |
| M5-22P1 Rotek Slewing Ring Bearings | Mass pillow block:15.4 kg; dc:76.2 mm; N1:19.05 mm; Cap bolt, SAE grade:5; PosiTrac Plus contact element (dc shaft position):B10724-53; Appropriate attachment bolt size G:0.625 in; P150°:19.6 kN; PG:1/8 NPT; Labyrinth ring (dc shaft position):LOR 54; P60°:60.5 kN; End plug (suffix Y):EPR 12; Stabilizing ring:2 x SR-1516; ba:30.163 mm; Ca:42.799 mm; A2:126.603 mm; Max. speed for PosiTrac Plus seal:1450 r/min; |
| M5-22P1Z Rotek Slewing Ring Bearings | Coefficient of friction µ min.:0.08; d:250 mm; Permissible sliding velocity v max.:0.5 m/s; D1:285 mm; α:124 °; Tolerance housing:H7; D:270 mm; Specific static load factor K0:45 N/mm²; B:100 mm; Specific dynamic load factor K:25 N/mm²; Mass bushing:7.21 kg; a:5 mm; Tolerance shaft:e7; h:252.5 mm; B1:10 mm; Permissible sliding velocity v min.:0 m/s; Coefficient of friction µ max.:0.15; |
| RKS.900155101001 SKF Slewing Ring Bearings | Attainable speed for grease lubrication:18500 r/min; Static axial stiffness, preload class C:311 N/µm; Calculation factor (back-to-back, face-to-face) Y1:0.92; Basic static load rating C0:17.3 kN; Calculation factor e:0.68; D:110 mm; Static axial stiffness, preload class B:238 N/µm; Calculation factor f1:0.99; db min.:76 mm; Preload class A GA:200 N; Db max.:105.8 mm; ra max.:1 mm; D1:95.32 mm; |
| RKS.060.20.0844 SKF Slewing Ring Bearings | Max. speed for PosiTrac Plus seal:2350 r/min; Mass pillow block:15.4 kg; Stabilizing ring:SR-15-0; PosiTrac Plus contact element:2 x B10724-37; J min.:219.075 mm; P90°:45.4 kN; H1:82.55 mm; Initial grease fill:68.04 g; P60°:75.6 kN; P150°:25.4 kN; J1:47.625 mm; P180°:30.7 kN; H2:30.163 mm; RG:1/4 NPT; Labyrinth ring:2 x LOR 38; Appropriate attachment bolt size G:0.5 in; End plug (suffix Y):EPR 7; |