| A18-80N1 Rotek Slewing Ring Bearings | F:416 mm; b1:15.5 mm; r1,2 min.:6 mm; d:340 mm; Fatigue load limit Pu:365 kN; rb max.:5 mm; Da max.:594 mm; Limiting speed:1200 r/min; da max.:401 mm; ra max.:5 mm; s max.:8 mm; Mass bearing:226 kg; h:20 mm; Axial load factor Y:0.4; Basic static load rating C0:4500 kN; r3,4 min.:6 mm; Limiting value e:0.3; db min.:421 mm; Reference speed:1000 r/min; da min.:366 mm; |
| 3R6-71N9 Rotek Slewing Ring Bearings | R2:38.1 mm; H:298.45 mm; Stabilizing ring:SR-28-0; Taconite seal:TER 121; Housing:SAFS 528; Max. speed for Taconite seal:625 r/min; S:4.763 mm; Ca:77.8 mm; ba:61.119 mm; J1:85.725 mm; Eye bolt:2 x 3/8-16 UNC; A1:149.225 mm; Mass pillow block:92.5 kg; da:123.825 mm; Da:250 mm; J max.:434.975 mm; Cap bolt:7/8-9 UNC; End plug (suffix Y):EPR 27; RG:3/4 NPT; P90°:180 kN; |
| L9-53E9Z Rotek Slewing Ring Bearings | Base to Center Height:Standard; Bearing Insert Material:Steel; Housing Type:Narrow Slot Take-Up; UPC:782475903450; Ball Grade:Class 10; Manufacturing Plant Location:Rogersville, TN; Expansion Type:Non-Expansion; d:1.1875 in; Bearing Family:Setscrew Ball Bearin; Bearing Outer Ring Material:Steel; Bearing Series:206 Series; Bearing Bore Shape:Round; Housing Coating:Powder Coat; Retainer Type:Std Retainer; |
| 62.20.0544.575.01.1403 Standard 5 Slewing Ring Bearings | End plug (suffix Y):EPR 18; Housing:SAF 634; Cap bolt, SAE grade:5; S:4.763 mm; J1:127 mm; Da:359.999 mm; Taconite seal:TER 141; J min.:571.5 mm; A2:352.425 mm; h:69.85 mm; Mass pillow block:213 kg; A1:203.2 mm; Pa:60.9 kN; R2:42.862 mm; Eye bolt:2 x 1/2-13 UNC; P120°:136 kN; Initial grease fill:2154.6 g; R1:122.237 mm; P180°:145 kN; Cap bolt:4 x 7/8-9 UNC; |
| 3R8-59N2C Rotek Slewing Ring Bearings | Housing:FY 505 M/VZ033; Limiting speed:1500 r/min; N4:4 mm; Hexagonal key size for grub screw N:2.5 mm; Recommended tightening torque for grub screw:4.2 N·m; J6:83 mm; Mass bearing unit:0.7 kg; s1:21 mm; T:40 mm; Thread grub screw G2:M5; Recommended diameter for attachment bolts, inch G:0.375 in; Db1:65 mm; Fatigue load limit Pu:0.335 kN; A1:12 mm; Basic static load rating C0:7.8 kN; J:70 mm; |
| 60.20.0644.500.01.1503 Standard 5 Slewing Ring Bearings | Permissible sliding velocity v min.:0 m/s; Tolerance housing:H7; B:12 mm; Tolerance shaft:e7; Coefficient of friction µ min.:0.08; d:12 mm; Permissible sliding velocity v max.:0.5 m/s; Mass bushing:0.015 kg; Specific dynamic load factor K:25 N/mm²; D:18 mm; Coefficient of friction µ max.:0.15; Specific static load factor K0:45 N/mm²; |
| H8-54N1 Rotek Slewing Ring Bearings | T:47.1 mm; B4:6 mm; L1:89 mm; Basic static load rating C0:15.3 kN; H:157 mm; N:13.1 mm; A:36.5 mm; Mass bearing unit:0.77 kg; J1:31.8 mm; Hexagonal key size for grub screw N:3.969 mm; L:95 mm; Recommended diameter for attachment bolts, inch G:0.5 in; A1:16.1 mm; Thread grub screw G2:5/16-24 UNF; Bearing:YAR 207-104-2RF/VE49; Housing material:Composite for food a; H1:60.3 mm; Recommended tightening torque for grub screw:6.5 N·m; |
| 60.20.0644.575.01.1403 Standard 5 Slewing Ring Bearings | P180°:42.9 kN; J min.:295.275 mm; Labyrinth ring:2 x LOR 184; P90°:62.3 kN; A1:111.125 mm; H1:114.3 mm; Cap bolt:2 x 3/4-10 UNC; P60°:104 kN; da:74.612 mm; J1:60.325 mm; N1:22.225 mm; H2:44.45 mm; Stabilizing ring:2 x SR-1617; Cap bolt, SAE grade:8; Ca:69.799 mm; Cap bolt recommended tightening torque:515.2 N·m; Initial grease fill:365.71 g; End plug (suffix Y):EPR 10; H:222.25 mm; |