| S12-70E1 Rotek Slewing Ring Bearings | H:138 mm; H1:52.4 mm; L1:76 mm; J:47.6 mm; J1:31.8 mm; Recommended diameter for attachment bolts, inch G:0.375 in; Basic dynamic load rating C:19.5 kN; Hexagonal key size for grub screw N:3.175 mm; A:32 mm; Recommended diameter for attachment bolts, mm G:10 mm; Recommended tightening torque for grub screw:4 N·m; Housing material:Composite for food a; d:30.163 mm; Limiting speed with shaft tolerance h6:3800 r/min; |
| 250.15.0300.013 Type 13/4 Standard 5 Slewing Ring Bearings | d1:163.512 mm; Mass adapter sleeve assembly:7.2 kg; d:180 mm; d3:230 mm; G:M 180x3; B:34 mm; B1:122 mm; Hydraulic nut:HMV 36 E; |
| 3R8-98N9 Rotek Slewing Ring Bearings | Material constant KM:330; Da max.:70.5 mm; Specific dynamic load factor K:100 N/mm²; Da min.:66.2 mm; b1:4.6 mm; Basic dynamic load rating C:156 kN; da min.:54.6 mm; M:3 mm; B:35 mm; r2 min.:1 mm; Mass plain bearing:0.56 kg; C:28 mm; Sealing solution:Triple-lip seals; α:6 °; r1 min.:0.6 mm; dk:66 mm; b:4.6 mm; Specific static load factor K0:500 N/mm²; D:75 mm; Basic static load rating C0:780 kN; |
| 62.20.0400.000.11.1503 Standard 5 Slewing Ring Bearings | a:23.3 mm; Number of balls z:21; Preload class A GA:130 N; Da max.:75.4 mm; Calculation factor (back-to-back, face-to-face) Y1:0.92; da max.:59.7 mm; Calculation factor (back-to-back, face-to-face) Y2:1.41; ra max.:1 mm; Attainable speed for grease lubrication:23000 r/min; r3,4 min.:0.6 mm; Ball diameter Dw:7.938 mm; Basic dynamic load rating C:14.8 kN; D:80 mm; r1,2 min.:1 mm; Static axial stiffness, preload class B:156 N/µm; |
| 3R8-59N2E Rotek Slewing Ring Bearings | Initial grease fill:878.85 g; Eye bolt:2 x 3/8-16 UNC; End plug (suffix Y):EPR 18; L:628.65 mm; J1:107.95 mm; J max.:549.275 mm; Mass pillow block:125 kg; Appropriate attachment bolt size G:1 in; Cap bolt:4 x 3/4-10 UNC; RG:3/4 NPT; Cap bolt recommended tightening torque:203.4 N·m; Labyrinth ring:2 x LOR 141; H1:179.375 mm; P60°:234 kN; A2:242.887 mm; Pa:43.6 kN; R1:115.888 mm; Ca:95.809 mm; |
| R8-52E3 Rotek Slewing Ring Bearings | r1 min.:0.6 mm; l2 max.:174 mm; l7 min.:40 mm; Specific dynamic load factor K:100 N/mm²; h:130 mm; Basic static load rating C0:110 kN; G:M 36x3; α:6 °; dk:47 mm; Basic dynamic load rating C:80 kN; d:35 mm; Mass rod end:1.3 kg; B:25 mm; Material constant KM:330; C1 max.:22 mm; d2 max.:84 mm; l1 min.:68 mm; |
| A16-95N6 Rotek Slewing Ring Bearings | B:25 mm; Da:188 mm; Dynamic Load Rating:73.1 kN; d:150 mm; D:210 mm; Oil Holes:2.5 mm; Radius:1.5 mm; da:168 mm; Static Load Rating:131.9 kN; |
| L9-49E9Z Rotek Slewing Ring Bearings | Cap bolt recommended tightening torque:400 N·m; A2:193.675 mm; J min.:396.875 mm; H2:60.325 mm; R2:38.1 mm; P60°:249 kN; PG:1/4 NPT; Eye bolt:3/8-16 UNC; Max. speed for PosiTrac Plus seal:950 r/min; P120°:94.3 kN; End plug (suffix Y):EPR 18; H:305.594 mm; H1:152.4 mm; Stabilizing ring:2 x SR-0-24; Ca:86.614 mm; J max.:441.325 mm; A1:149.225 mm; h:43.656 mm; J1:85.725 mm; L:511.175 mm; |