| 60.22.0370.301.11.1504 Standard 5 Slewing Ring Bearings | D1:154 mm; D:250 mm; Limiting speed:1300 r/min; Basic static load rating C0:3250 kN; ra max.:2.1 mm; Fatigue load limit Pu:285 kN; Mass bearing:13.9 kg; Da max.:162 mm; Reference speed:630 r/min; d:150 mm; da min.:245 mm; d1:250 mm; Minimum axial load factor A:0.845; Basic dynamic load rating C:670 kN; B:20.5 mm; r1,2 min.:2.1 mm; H:60 mm; |
| 161.20.0450.891.21.1503 Standard 5 Slewing Ring Bearings | B:38.1 mm; Housing material:Composite for food a; A1:12 mm; Recommended tightening torque for grub screw:4 N·m; A5:26.5 mm; G:M16; B4:5 mm; H2:40 mm; H1:89 mm; A:34 mm; s1:22.2 mm; Basic static load rating C0:11.2 kN; Grub (set) screw G2:1/4-28 UNF; Mass bearing unit:0.6 kg; Basic dynamic load rating C:19.5 kN; L:125 mm; H:102.5 mm; G1:21 mm; A2:30 mm; Fatigue load limit Pu:0.475 kN; |
| W17-108P1 Rotek Slewing Ring Bearings | Recommended diameter for attachment bolts, inch G:0.75 in; H1:76.2 mm; Housing material:Cast iron; Recommended diameter for attachment bolts, mm G:20 mm; A:65 mm; H2:39 mm; L:260 mm; Limiting speed:2800 r/min; N:30 mm; SWN:11.113 mm; DN:6.579 mm; J:210 mm; R1:4.5 mm; Fatigue load limit Pu:1.86 kN; Housing:SY 514 U; J6:240 mm; N1:22 mm; Basic static load rating C0:45 kN; d:63.5 mm; Hexagonal key size for grub screw N:5.556 mm; |
| A10-110P2D Rotek Slewing Ring Bearings | D:600 mm; da min.:424 mm; d1 ≈:460 mm; Basic static load rating C0:11000 kN; das:442 mm; Basic dynamic load rating C:5500 kN; D1 ≈:540 mm; Limiting speed:560 r/min; s max.:11 mm; Reference speed:450 r/min; Calculation factor kr:0.5; r1,2 min.:5 mm; ra max.:4 mm; d:400 mm; Mass bearing:270 kg; Fatigue load limit Pu:900 kN; r3,4 min.:5 mm; rb max.:4 mm; B:272 mm; b1:9.4 mm; |
| 3R6-71E9 Rotek Slewing Ring Bearings | RG:3/4 NPT; R2:38.1 mm; Cap bolt:3/4-10 UNC; Da:250 mm; A2:193.675 mm; P120°:116 kN; S:4.763 mm; Max. speed for PosiTrac Plus seal:1150 r/min; da:122.237 mm; H2:60.325 mm; Labyrinth ring:2 x LOR 120; PG:1/4 NPT; P90°:180 kN; Eye bolt:2 x 3/8-16 UNC; A1:149.225 mm; Cap bolt, SAE grade:8; Ca:77.8 mm; Mass pillow block:94.3 kg; Pa:28.5 kN; ba:61.119 mm; |
| 3R10-98N1B Rotek Slewing Ring Bearings | Housing:SAW 518; Cap bolt recommended tightening torque:203.4 N·m; RG:3/8 NPT; A2:206.375 mm; da:77.787 mm; N1:19.05 mm; R1:60.325 mm; H1:101.6 mm; A1:98.425 mm; Cap bolt, SAE grade:5; P60°:101 kN; PG:1/8 NPT; Max. speed for Taconite seal:950 r/min; ba:47.625 mm; P150°:34.7 kN; P90°:60.9 kN; Taconite seal:TER 186; P120°:38.3 kN; S:4.763 mm; Appropriate attachment bolt size G:0.625 in; |
| 231.21.0575.013 Type 21/650.1 Standard 5 Slewing Ring Bearings | Mass needle roller and cage assembly:0.012 kg; Ew:26 mm; U:17 mm; Basic dynamic load rating C:13.2 kN; Fatigue load limit Pu:2.7 kN; Limiting speed:20000 r/min; Basic static load rating C0:22.8 kN; Reference speed:18000 r/min; Fw:22 mm; |
| 231.21.0475.013 Type 21/520.1 Standard 5 Slewing Ring Bearings | N4:4 mm; Da:93.7 mm; N:11.5 mm; Mass bearing unit:1.05 kg; A5:20 mm; Fatigue load limit Pu:0.475 kN; A:32.5 mm; A1:13 mm; Basic dynamic load rating C:19.5 kN; T:42.2 mm; Housing material:Cast iron; L:108 mm; B:38.1 mm; s1:22.2 mm; Db1:76 mm; Basic static load rating C0:11.2 kN; d:30 mm; Recommended diameter for attachment bolts, mm G:10 mm; Recommended tightening torque for grub screw:4 N·m; |