| L9-53N9Z Rotek Slewing Ring Bearings | Basic dynamic load rating C:4.4 kN; Reference speed:30000 r/min; Mass needle roller and cage assembly:0.0015 kg; U:10 mm; Fatigue load limit Pu:0.57 kN; Limiting speed:34000 r/min; Fw:9 mm; Basic static load rating C0:5.2 kN; Ew:12 mm; |
| 60.30.0550.100.11.1504 Standard 5 Slewing Ring Bearings | Basic dynamic load rating C:44.6 kN; Calculation factor kr:0.1; rb max.:0.6 mm; da min.:48.2 mm; Limiting speed:13000 r/min; Basic static load rating C0:52 kN; B:16 mm; r3,4 min.:0.6 mm; d:45 mm; r1,2 min.:1 mm; db min.:54 mm; Da max.:70.4 mm; s max.:0.9 mm; Mass bearing:0.19 kg; da max.:51 mm; D1 ≈:65.3 mm; D:75 mm; ra max.:1 mm; Reference speed:12000 r/min; F:52.5 mm; |
| 3R6-71P9 Rotek Slewing Ring Bearings | P120°:94.3 kN; J min.:396.875 mm; P150°:85.9 kN; Pa:66.7 kN; db:158.75 mm; Mass pillow block:67.6 kg; N1:28.575 mm; Eye bolt:3/8-16 UNC; Appropriate attachment bolt size G:1 in; Taconite seal (dc shaft position):TER 127; J1:85.725 mm; Taconite seal (db shaft position):TER 144; End plug (suffix Y):EPR 16; H:305.594 mm; Max. speed for Taconite seal:490 r/min; ba:61.119 mm; L:511.175 mm; A2:260.35 mm; |
| 61.20.0400.101.21.1503 Standard 5 Slewing Ring Bearings | db min.:195 mm; Fatigue load limit Pu:193 kN; B:126 mm; Reference speed:1300 r/min; B1:161 mm; D1 ≈:317 mm; K:12 mm; Limiting speed:1700 r/min; ra max.:3 mm; Calculation factor Y0:1.8; d3:230 mm; Basic static load rating C0:2450 kN; da max.:224 mm; D:380 mm; d1:160 mm; Ba min.:8 mm; Mass bearing + sleeve:80 kg; Da max.:363 mm; B4:30 mm; r1,2 min.:4 mm; |
| S14-80E1 Rotek Slewing Ring Bearings | Housing:FY 504 M/VZ033; Recommended diameter for attachment bolts, inch G:0.375 in; T:37.3 mm; Recommended tightening torque for grub screw:4 N·m; J7:16 mm; Recommended diameter for attachment bolts, mm G:10 mm; Housing material:Cast iron; Hexagonal key size for grub screw N:3 mm; s1:18.3 mm; N:11.5 mm; Db1:57 mm; L:86 mm; Fatigue load limit Pu:0.28 kN; Basic dynamic load rating C:12.7 kN; J:63.5 mm; |
| S24-178E1 Rotek Slewing Ring Bearings | h:162 mm; Permissible sliding velocity v max.:0.5 m/s; B:240 mm; α:124 °; d:160 mm; Mass bushing:11 kg; Coefficient of friction µ max.:0.15; Specific dynamic load factor K:25 N/mm²; Tolerance shaft:e7; Coefficient of friction µ min.:0.08; Specific static load factor K0:45 N/mm²; Permissible sliding velocity v min.:0 m/s; D:180 mm; a:12 mm; Tolerance housing:H7; |
| 230.20.0500.013 Type 21/650. Standard 5 Slewing Ring Bearings | Mass shaft washer:1.59 kg; d1:267 mm; B:11 mm; d:220 mm; r1,2 min.:1.1 mm; |
| R8-42N3 Rotek Slewing Ring Bearings | d:6 mm; Tolerance housing:H7; Specific dynamic load factor K:10 N/mm²; Tolerance shaft:h8; Coefficient of friction µ max.:0.1; B:4 mm; Coefficient of friction µ min.:0.05; Specific static load factor K0:20 N/mm²; Mass bushing:0.001 kg; D1:14 mm; Permissible sliding velocity v max.:5 m/s; D:10 mm; B1:2 mm; Permissible sliding velocity v min.:0.25 m/s; |