| 230.20.0600.503 Type 21/750. Standard 5 Slewing Ring Bearings | Flinger Type:Rubberized; Bearing Locking Device:Concentric Clamp Col; Ship Weight:3.62 LB; Seal Type:Single Lip; Retainer Type:Std Retainer; Bearing Outer Ring Material:Steel; Bearing Insert Material:Steel; Expansion Type:Non-Expansion; Shaft Attachment (2):D-Lock; Bearing Family:D-Lock Ball Bearing; Ball Material:Steel; Grease Type:Unirex N2; End Cap Groove:Yes; Max Bearing Speed:5500 rpm; Self Aligning:Self Centering; |
| 161.16.0630.890.11.1503 Standard 5 Slewing Ring Bearings | Shaft design:Without shaft; D1:55 mm; Corrosion protection:Zinc-coated housing; N:6.7 mm; Purpose/ Application:Seeding; Maximum rotational disc speed max.:350 r/min; d:16.07 mm; D2:30 mm; Mass:0.46 kg; J:75 mm; r:1.5 mm; Sealing system:5-lip seal opposite; Recommended maximum temperature max.:50 °C; Recommended minimum temperature min.:-20 °C; Basic static load rating C0:13.2 kN; Minimum rotational disc speed min.:100 r/min; |
| 3R16-102P5 Rotek Slewing Ring Bearings | Mass inner ring:0.23 kg; F:73 mm; r, r1,2 min.:1 mm; d:65 mm; B:35 mm; |
| 3R8-59N2E Rotek Slewing Ring Bearings | Initial grease fill:878.85 g; Eye bolt:2 x 3/8-16 UNC; End plug (suffix Y):EPR 18; L:628.65 mm; J1:107.95 mm; J max.:549.275 mm; Mass pillow block:125 kg; Appropriate attachment bolt size G:1 in; Cap bolt:4 x 3/4-10 UNC; RG:3/4 NPT; Cap bolt recommended tightening torque:203.4 N·m; Labyrinth ring:2 x LOR 141; H1:179.375 mm; P60°:234 kN; A2:242.887 mm; Pa:43.6 kN; R1:115.888 mm; Ca:95.809 mm; |
| S12-70E1 Rotek Slewing Ring Bearings | H:138 mm; H1:52.4 mm; L1:76 mm; J:47.6 mm; J1:31.8 mm; Recommended diameter for attachment bolts, inch G:0.375 in; Basic dynamic load rating C:19.5 kN; Hexagonal key size for grub screw N:3.175 mm; A:32 mm; Recommended diameter for attachment bolts, mm G:10 mm; Recommended tightening torque for grub screw:4 N·m; Housing material:Composite for food a; d:30.163 mm; Limiting speed with shaft tolerance h6:3800 r/min; |
| 161.20.0560.890.11.1503 Standard 5 Slewing Ring Bearings | Mass adapter sleeve assembly:21 kg; Hydraulic nut:HMVC 44E; d1:203.2 mm; B:32.004 mm; Threads per inch:8; Sleeve:S 144x8; d:220 mm; d3 max.:279.527 mm; B1:183.566 mm; B4:35.712 mm; G:219.151 mm; |
| 231.20.0500.503 Type 21/650.1 Standard 5 Slewing Ring Bearings | Limiting speed with shaft tolerance h6:7000 r/min; L1:63.5 mm; H1:46 mm; Fatigue load limit Pu:0.335 kN; B4:5 mm; Housing material:Composite for food a; Mass bearing unit:0.33 kg; T:41.6 mm; Thread grub screw G2:1/4-28 UNF; J:41.3 mm; B:34.1 mm; A1:11.4 mm; Basic dynamic load rating C:14 kN; Recommended diameter for attachment bolts, mm G:10 mm; H:120.5 mm; Recommended diameter for attachment bolts, inch G:0.375 in; |
| 250.15.0400.013 Type 13/5 Standard 5 Slewing Ring Bearings | Grease Type:Unirex N2; Housing Coating:Powder Coat; Base to Center Height:Not Applicable; Seal Type:Single Lip; Manufacturing Plant Location:Rogersville, TN; Bearing Bore Shape:Round; Bearing Family:Eccentric Collar Bal; Housing Material:Cast Iron; Housing Type:2 Bolt Flange With P; Flinger Material:None; Bearing Duty:Intermediate Duty; Bearing Series:207 Series; Ring Size:Standard; Ball Grade:Class 10; |