| M4-38P4 Rotek Slewing Ring Bearings | Ball Bearing Housing Series:207 Series; Ring Size:Standard; Retainer Type:Max Life Cage; UPC:782476481865; Manufacturing Plant Location:Rogersville, TN; Retainer Material:Polymer; Bearing Family:Setscrew Ball Bearin; Flinger Material:Stainless Steel; Bearing Outer Ring Material:Steel; Seal Type:Triple Lip; Base to Center Height:Standard; Bearing Inner Ring Material:Steel; Ball Grade:Class 24; Expansion Type:Non-Expansion; |
| 62.20.0400.000.11.1503 Standard 5 Slewing Ring Bearings | a:23.3 mm; Number of balls z:21; Preload class A GA:130 N; Da max.:75.4 mm; Calculation factor (back-to-back, face-to-face) Y1:0.92; da max.:59.7 mm; Calculation factor (back-to-back, face-to-face) Y2:1.41; ra max.:1 mm; Attainable speed for grease lubrication:23000 r/min; r3,4 min.:0.6 mm; Ball diameter Dw:7.938 mm; Basic dynamic load rating C:14.8 kN; D:80 mm; r1,2 min.:1 mm; Static axial stiffness, preload class B:156 N/µm; |
| 3R8-98E9 Rotek Slewing Ring Bearings | Calculation factor kr:0.1; s max.:3.3 mm; Fatigue load limit Pu:16.3 kN; r1,2 min.:1.1 mm; Reference speed:7000 r/min; D:125 mm; Basic static load rating C0:127 kN; da max.:90 mm; D1 ≈:109 mm; d:80 mm; Mass bearing:0.88 kg; B:22 mm; F:91.5 mm; rb max.:1 mm; Basic dynamic load rating C:99 kN; db min.:94 mm; r3,4 min.:1 mm; da min.:86 mm; Limiting speed:7500 r/min; Da max.:119 mm; |
| H8-54N1 Rotek Slewing Ring Bearings | T:47.1 mm; B4:6 mm; L1:89 mm; Basic static load rating C0:15.3 kN; H:157 mm; N:13.1 mm; A:36.5 mm; Mass bearing unit:0.77 kg; J1:31.8 mm; Hexagonal key size for grub screw N:3.969 mm; L:95 mm; Recommended diameter for attachment bolts, inch G:0.5 in; A1:16.1 mm; Thread grub screw G2:5/16-24 UNF; Bearing:YAR 207-104-2RF/VE49; Housing material:Composite for food a; H1:60.3 mm; Recommended tightening torque for grub screw:6.5 N·m; |
| A14-43P1 Rotek Slewing Ring Bearings | H2:44.45 mm; H1:114.3 mm; P60°:104 kN; da:76.2 mm; Initial grease fill:181.44 g; End plug (suffix Y):EPR 10; Housing:FSAF 617; Cap bolt:2 x 3/4-10 UNC; Appropriate attachment bolt size G:0.75 in; P90°:62.3 kN; P180°:42.7 kN; Stabilizing ring:SR-20-17; Max. speed for PosiTrac Plus seal:1950 r/min; A1:111.125 mm; ba:48.419 mm; RG:3/8 NPT; Cap bolt, SAE grade:8; Pa:15.3 kN; J max.:333.375 mm; |
| 3R6-71N9 Rotek Slewing Ring Bearings | R2:38.1 mm; H:298.45 mm; Stabilizing ring:SR-28-0; Taconite seal:TER 121; Housing:SAFS 528; Max. speed for Taconite seal:625 r/min; S:4.763 mm; Ca:77.8 mm; ba:61.119 mm; J1:85.725 mm; Eye bolt:2 x 3/8-16 UNC; A1:149.225 mm; Mass pillow block:92.5 kg; da:123.825 mm; Da:250 mm; J max.:434.975 mm; Cap bolt:7/8-9 UNC; End plug (suffix Y):EPR 27; RG:3/4 NPT; P90°:180 kN; |
| 161.20.0630.891.21.1503 Standard 5 Slewing Ring Bearings | Flinger Material:Steel; Manufacturing Plant Location:Rogersville, TN; Base to Center Height:Not Applicable; Grease Type:Unirex N2; Expansion Type:Non-Expansion; Bearing Inner Ring Material:Steel; Ball Grade:Class 10; Ball Material:Steel; Max Bearing Speed:5000 rpm; Bearing Locking Device:Setscrew; Retainer Material:Nylon; Seal Type:Single Lip; Flinger Type:Rubberized; Ball Bearing Housing Series:208 Series; |
| 3R10-98P9 Rotek Slewing Ring Bearings | Retainer Material:Polymer; Base to Center Height:Not Applicable; Expansion Type:Non-Expansion; Seal Type:Shield; Max Bearing Speed:4500 rpm; Housing Coating:Powder Coat; Bearing Bore Shape:Round; Bearing Insert Material:Steel; Shaft Attachment (2):Set Screw; Ring Size:Standard; Ball Material:Steel; Bearing Inner Ring Material:Steel; Retainer Type:Max Life Cage; Bearing Duty:Medium Duty; Anti-Rotation Pin:Yes; |